In 2003,YONGDA started to invest into developing stone profiling line and achieved in 2003. This is the first automatic stone profiling line. From then on,our machine has gained much good evaluation from our largest customers such as Best Cheer, UMGG, KangLi, XiShi, YingLiang, BaoYun, ChuanQi, HaoTing, WangFeng, WangFang,etc.
By the end of 2012,we finished developing the YXT-200(3+5) automatic stone profiling line based on the experience of the first generation successfully. And we have expanded the functions of the machine with Automatic Tool Correcting and Romote Control.
AUTOMATIC TOOL CORRECTING FUNCTION
For a long time, because the precision of the polishing wheel of the line machine can not be guaranteed, the alignment of the polishing wheel must be adjusted in the same line manually. In the past, it took several hours to adjust all the polishing wheels roughly into a straight line. It can not be precisely in the same line, and it takes several minutes to polish the stone line slowly. Running in so as to waste material and waste time is rather troublesome. YXT-200II automatic tool aligning line polishing production line successfully solved the knife aligning difficult problem before the line machine, automatic tool aligning function in 5 minutes will automatically and accurately adjust all polishing wheels in the same line, fast and accurate!
INTELLIGENT SOFTWARE HUMANIZED CONTROL TECHNOLOGY
Line polishing process for the dynamic balance of the polishing wheel requires very high, otherwise it is easy to produce strong vibration affect the quality of polishing and even shake the plate. After more than 10 years of experience and research, Yongda independently developed a set of intelligent software, scientifically and accurately calculate the pressure needed in the polishing process and intelligent adjustment, plus self-locking function, so as to control the whole polishing process more accurate, more stable and more reliable.
REMOTE CONTROL FUNCTION
The wireless transmission and reception technology is applied in the control of the sliver machine. It is not affected by obstacles, the signal is stable and reliable, and the remote controller is small and easy to carry. In the past, two people were required to control the wheel lifting, one to observe the wheel lifting in and out, the other to operate the control button. It’s enough for a person to control the grinding wheel when using the remote control. And zero distance observation of any grinding wheel lifting or in and out of the precise situation, not only save manpower and greatly improve production efficiency and quality. The remote controller can also realize the remote control of the line machine at any position within 50 meters of the off-line machine, and can respond more quickly when abnormal equipment is found.
|nos of shaping wheel||pc||3|
|dia of shaping wheel||mm||200|
|nos of polishing wheel||pc||5|
|dia of polishing wheel||mm||200|